2017 Kayak Workshop, was part of and supported by Kulturhavn365 and publicly open and free for all participants. 12-20 participants formed four teams to design and build skin-on-frame kayaks in just 3 days from Friday evening to Sunday evening. One team turned the design into a stand up paddle board, the other teams designed harbour kayaks of different lengths and with different features. After fungus+oil treatment, we skinned the kayaks with heat-shrink plastic foil 300mu. link
2015 Material Actuation, was part of introduction to the course Material and Detail at Chalmers University of Technology. During two weeks student teams investigated three modes of material actuation. Addition, four students constructed and tested an EPS extruder. Modification, four students constructed and tested a CNC metal-plate bender. Subtraction, four students constructed and tested a large scale CNC hotwire cutting system, able to cut EPS foam blocks up to 1200x1200x600mm. All projects made use of a large scale robotic arm.link
2015 Dynamic Environments, at IAAC 2015, With Areti Markopoulou, Manuel Kretzer, Alexandre Dubor, Carlos Bausa. The workshop was set as a collaboration between the three schools, IAAC, Chalmers, and ITA. It focused on the design of material behaviors in architecture, using novel materials and machines.link
2013 Tangible Interaction Course A project developed with a group of master students at Dept. of Applied IT, Chalmers, during the Tangible interactions course. The project investigate the emergence in manually assemblied structures that grow based on predefined gaming rules.link
2011 OSSA WAW 2011 – Urban Phenomena with Michal Gdak, Poly Technical University Warsaw, Department of Architecture. Invited as workshop leaders we did a 6 day workshop,12 students introduced to microprocessors and sensor technology. First phase just developing conceptual and theoretical frame, second phase was making interactive materially active ‹Synapses› for the city of Warsaw.link
2011 SmartGeometry, March 2011 Building the Invisible. SG-Group, School of Architecture, participants from world wide. As CITA and the Royal Academy of Fine Arts was hosting the event I was deeply involved with the planning of everything from participants acceptance, payments to materials orders and spatial requirements. link
2011 Paths To Production, Januar 2011 with Mark Burry, Jane Burry and others, School of Architecture Ek2, and CITA, 19 candidate students. An eight days research workshop developing the detailed solutions for project ‹Dermoid›. link
2010 Material Behavior, November 2010 with Mark Burry, Jane Burry and others, School of Architecture department 2, and CITA, 21 candidate students. An eight days research workshop developing topological suggestions for project ‹Dermoid›. link
2010 EASA 2010 -Resposnsive Environments, with David Engell Jessen. 14 days of workshop introducing microprocessors and sensor technology, with the aim to develop a series of interactive environments in the city of Manchester. 13 Participants from all over Europe. link
2008 Behaving Structures, November 2008 , with Martin Tamke, Jacob Riiber, School of Architecture department 8, candidate students.
2008 Dynamic Descriptions, September 2008, with Martin Tamke, Jacob Riiber, School of Architecture department 8, candidate students.